Skip to content

Suspension setup & alignment · Brendale

Suspension Setup &Performance Alignment

New coilovers or adjustable arms only perform as well as they're set up. At Roccomotive, we set up your suspension in the right order. We start with shock length, then ride height and corner balance on level flat patches, and finish with a precision alignment. We align using string lines plus dedicated camber and caster gauges for accuracy. The result is a car that handles predictably, wears tyres evenly and keeps the full travel your suspension was designed for.

Whether it's a daily driver on lowered springs or a weekend track car, we'll set it up to suit how you drive. You get a printout of the readings with every job.

Where
Unit 2, 13 Aldinga Street, Brendale QLD
Alignment
In-house: string lines plus camber and caster gauges
Corner balance
Level flat patches, scales under each wheel
Every job
A printout of the readings

The services

Four services, done in order.

Book one on its own, or save with a setup package below.

01

Shock Length Setup

$300Book

What it is

We remove each shock from the car and take the spring off. We then set the shock body length so the suspension has the right amount of travel and reinstall it. With the spring off, we cycle the suspension through its full travel to check the bump stop makes contact before the wheel or tyre hits the guard or body. Because this changes with wheel and tyre size, we set it for the wheels you actually run.

$300. Includes removing and reinstalling the shocks.

When you need it

  • After fitting new or second-hand coilovers
  • After changing wheel or tyre size
  • If the tyres rub or hit the guards over bumps
  • If the car feels harsh, crashes over bumps or bottoms out
  • Before any track work or a full setup

Benefits

  • Protects your wheels, tyres and guards from contact damage
  • Keeps full shock travel, so the car doesn't ride on its bump stops or top out
  • A smoother ride and more consistent grip over bumps
  • Less stress on the shocks and top mounts, so they last longer
  • A correct base for ride height, corner balance and alignment
02

Ride Height Setting

$100Book

What it is

We measure and set the height at all four corners to your target, whether that's a specific stance, a fender gap or a track ride height. We make sure the car sits level from side to side.

$100. For street cars where corner balance isn't needed. For track cars, see Ride Height & Corner Balance.

When you need it

  • After fitting coilovers
  • If the car sits lower on one side or one corner
  • When changing from a street setup to a track setup, or back again
  • After the suspension has settled, a few hundred kilometres after install

Benefits

  • The car sits level and looks right
  • Even handling turning left and right
  • Avoids scraping, tyre rub and bad suspension geometry from running too low
  • Needs to be set before an alignment, since changing height changes camber and toe
03

Ride Height & Corner Balance (Flat Patch)

$185Book

What it is

We set the car up on perfectly level flat patches, with the suspension settled and driver weight in the seat. We then set the ride height at all four corners and use scales under each wheel to balance the weight across the car. Every measurement is taken the way the car actually sits on the road.

$185. Includes ride height setting.

When you need it

  • After fitting coilovers on a car that's driven hard or tracked
  • On track, motorkhana or hillclimb cars
  • If the car handles differently turning left than turning right
  • If the car feels nervous under brakes or pulls to one side

Benefits

  • Measurements aren't thrown off by an uneven workshop floor
  • Balanced weight gives consistent grip and braking in both directions
  • More confidence at the limit and faster lap times
  • Your setup is recorded, so it can be repeated after changes
04

Performance Wheel Alignment

$225Book

What it is

A full four-wheel alignment of camber, caster and toe on cars with adjustable arms, camber bolts, camber plates or coilovers. We use string-line alignment for toe and thrust angle, plus dedicated camber and caster gauges, for accurate readings on lowered and modified cars. We set it to factory spec, a street performance spec or your own track numbers, not just toe like a standard tyre-shop alignment.

$225. Camber, caster and toe on all four wheels, with a printout of the readings.

When you need it

  • After fitting adjustable arms, camber kits or coilovers
  • After any change to ride height
  • If you see uneven tyre wear, especially on the inside edges
  • If the steering wheel is off-centre or the car pulls or wanders
  • Before a track day, or when going back to a street setup

Benefits

  • Sharper turn-in and more front-end grip
  • Even tyre wear and longer tyre life
  • Stable, straight tracking at highway speeds
  • Accurate on cars too low or too modified for a standard alignment machine
  • Readings recorded for every job

Which service do I need?

Each step changes the next one.

Setup is done in a set order, because each step changes the next one. Changing ride height after an alignment will undo the alignment.

  1. 01Shock lengthSets the coilover's travel and bump stop contact.
  2. 02Ride height, or ride height & corner balanceSets the stance and balances the car.
  3. 03Wheel alignmentSets camber, caster and toe last.
Your situationWhat we recommend
Just fitted adjustable arms or camber bolts (stock height)Wheel alignment
Just fitted lowering springsWheel alignment
New wheels or tyres on coiloversShock length setup + Street Setup
Just fitted coiloversFull Setup
Track, hillclimb or motorkhana carFull Setup
Uneven tyre wear or car pullsWheel alignment (we'll check ride height too)
Tyres rub, or car feels harsh or bottoms outShock length setup + Street Setup

Setup packages

The whole job, one visit.

Packages group the services in the right order so the whole job is done in one visit.

Street Setup

$325

Includes

  • Ride height setting
  • Wheel alignment

Best for

Lowered daily drivers, adjustable arms

Balance & Align

$410

Includes

  • Ride height & corner balance on flat patches
  • Wheel alignment

Best for

Coilover cars already set to the right shock length

Full Setup

$710

Includes

  • Shock length setup
  • Ride height & corner balance on flat patches
  • Wheel alignment

Best for

New coilover installs, track, hillclimb and motorkhana cars

All prices are in AUD and include GST. Seized or damaged adjusters, bolts or collars are charged at our hourly rate, and we'll call you before doing any extra work.

Book now

Book your car in.

Pick the service or package, tell us the car and how it’s driven, and we’ll come back to confirm a day. Not sure which one? Choose “Not sure” and we’ll recommend one.

Or call 0415 672 000.

Pricing notes & FAQs

Asked before you ask.

Why does a performance alignment cost more than a standard one?
A standard alignment on a stock car usually only adjusts toe and camber with the standard alignment controls, and has limited adjustment. With adjustable arms or coilovers that give a larger range of adjustment, we can set more accurate camber, caster and toe on every corner, often over several rounds of adjusting and re-checking. We use string lines and camber and caster gauges rather than a quick machine check, which is more accurate on lowered and modified cars.
Why do the shocks have to come out for shock length setup?
The spring has to come off so we can cycle the suspension through its full travel. That's the only way to check that the bump stop makes contact before the wheel or tyre hits the body. If you change wheel or tyre size later, it's worth having this re-checked.
Do I need to bring anything?
If you have target specs from your parts supplier or another tuner, bring them along. If not, tell us how you use the car and we'll recommend a setup. For corner balance, let us know your weight, or come in to sit in the car. For shock length setup, bring the car on the wheels and tyres you'll be running.
How long does it take?
A wheel alignment takes about 2 hours. A Street Setup is about half a day, and a Full Setup can take most of a day.
Should I come back after fitting new suspension?
Yes. Springs and bushes settle in the first 500–1,000 km. We recommend a re-check after that to keep everything on spec.
Can you fit the parts as well?
Yes. We fit coilovers, adjustable arms, sway bars and braces, then set up the car in the same visit. Ask us for a fit-and-setup quote.
Do you do wheel alignments in-house?
Yes, at our Brendale workshop. We align with string lines plus dedicated camber and caster gauges, and you get a printout of the readings with every job.